Qi Wireless Charger Receiver for iPhone Ultra Thin Wireless Charging Qi Receiver Wireless Charging Receiver Patch Module Chip Compatible

We recommend that you read the following notice before you purchase the product? 1. Using QC 2.0/3.0 adapter to work with a qualified qi wireless charger is needed for best charging rate, otherwise charging process may be not stable and phone charge will be slower, If the charger does not meet the standard, the QI wireless charge receiver will not be able to charge your mobile phone at maximum power. 2. Before use, please make sure that the mobile phone charging port can be used normally. If the charging port has poor contact, QI wireless charger cannot be used, and charging interruption may occur. 3. To ensure the fastest charging speed, please keep adjusting your phone device’s position until both the center of our QI receiver’s coil and your wireless charger device are aligned.Do not use metal phone cases and phone cases that are too thick,please. 4.To prevent mechanical damage of the receiver cord, do not pull it out of the phone without special need. 5.It is pretty normal for the phone getting hot, for this happens even when it is with cable charging, but the charging speed slows down or stops to protect your phone. It starts again when cool enough again, Due to the internal over-heat protection settings, the charging speed of some phones could be slowly after 80% charged Product parameters Input voltage: DC5V Input current: 1A Transmit power: 5W Charging voltage: 5V Charging current: 1000MA Applicable interface: Lightning (Apple) Applicable models: iphone X, iphone XS / XR / XS max, iphone 8/8 Plus, iphone 7 / 7Plus, iphone 6 / 6s / 6Plus / 6s Plus, iphone 5 / 5s / 5c / se, etc. Applying imported high quality TI chipset ensures sufficient 5V/1000 mA power for wireless charging. Please feel free to contact us via Amazon email, we are there for you with 24/7 service