Qi Magnetic Wireless Car Fast Charger, WYNK Car Mount Phone Holder Charging for iPhone Xs/XS Max/XR/X/8/8 Plus,Samsung Galaxy S10e/S10/S10+/S9/S9 +/Note 9/8 and All QI-Enabled Devices

Two Charging Modes: 1. Fast Charge Compatible Devices (10W Output Max): - Samsung Galaxy Note 9/Note 8/S10/S10 e/S10 +/S9/S9 Plus/S8/S8 Plus/S7/S7 Edge (7.5W Output Max): - iPhone XS,iPhone XS Max,iPhone XR,iPhone X,iPhone 8,iPhone 8 Plus 2. Standard Charge Compatible Device(5W Output Max): - Samsung Galaxy S6/S6 Edge - All Other QI-enabled devices Specifications: Material: ABS + Magnet + Silicone Input: DC 9V 1.67A / 5V 2A Output: DC 9V 1A / 5V 1A Conversion Rate: 75% Dimension: 2.56in(diameter) 2.07in(height) Weight: 80G (=0.18 LB) Cable length: 1m/ 3.28ft Package includes: 1 X Wynk fast wireless charger 1X QC3.0 Car Charger Adapter (30W)1 X Cradle 1 X Micro USB Cable 2 X Metal Rings 3X Magnetic Plates 3 X Silicone cable clips 1 X User Manual Kindly notice: 1. Please connect this charger with full 1.5A output. Insufficient input current may cause unstable charging. 2. This wireless charger will not work if your phone case is over 6mm thickness, please use slim phone case. 3. For phones that are not Qi enabled, wireless charging receiver is recommended. Common problems and troubleshooting Q:How to install the magnetic metal ring? A:You can put the metal ring outside the phone case, so it won't fall off so easily.If your phone doesn't have a phone case,you can affix the metal ring directly on the phone,wait for a while to use it(12 hours),and it will not fall so easily. Please note that the phone case or the back of the phone must be flat and smooth.Metal Ring paste on the back of the phone is in the center position! Q:The phone was disconnected and reconnected while you were driving. A:When you use the wireless car charge, the car charger with 1A or 1.5A may appear charging pause,you need to use 2A or above car charging head for charging.