Do the following checks before installation:
Set the resolution of your signal source within 1920*1080P@60Hz, and check whether your device has image output.
1.Package Lists
1x HDMI Transmitter
1x HDMI Receiver
1x USB Charging Cable
1x User manual
2.Video
* Support HDMI cable within 164 feet;
* Support input & output max resolution 1920X1080@60Hz, 3D;
* Support max pixel clock 165MHz;
* Support max data transfer rate 6.75Gbps.
3.Ethernet
* Support Ethernet interface RJ45;
* Support Ethernet crimping method 568B (white orange, orange, white green, blue, white blue, green, white brown, brown);
* Recommended Ethernet cable length Cat5---100ft (30m), Cat5e---130ft (40m), Cat6/7/8---164ft(50m); Set the 30M/50M switch on the receiver according to your cable length please.
4.How to set EDID
If this extender does not recognize your TV (no picture), please do the following settings.
1.Connect the transmitter to the TV;
2.Power on the transmitter;
3.Press EDID (the button is in the STA hole) for 1 second to complete the copy. ?Long press for 5 seconds to restore the default EDID?;
4.After completing the EDID copy, connect all devices normally
5.Installation
1.Connect the transmitter (TX) to the signal source;
2.Connect the receiver (RX) to the TV;
3.Connect the transmitter and receiver with CAT5E/6;
4.Power on the transmitter or receiver (either side) with a USB cable;
5.When the STA light is steady blue, the device is operating normally
6.Others
* Max working voltage: 1A/5VDC;
* Operating Temperature range: (-5 to +70?);
* Dimension (L x W x H): 70*25*16 (mm);
