Polyurethane Seam Sealer Automotive Compound Kit - Durable & Flexible Auto Body Filler - Seam & Joint Compound for Bare, Primed or Painted Surfaces - Automotive Seam Sealer White - RV Roof Sealant

Superior Seal for Unparalleled Performance For a quick fix with lasting hold, turn to this automotive sealant to get the job done right. Properly patching voids demands durability. Set it and forget it with a body sealer that is non-shrinking, non-cracking, and low-odor. Incredibly versatile, this auto body seal compound can be used on any bare, primed, or painted surface. This auto sealant can fill all interior or exterior seams and joints. From wheel wells to door panels, from floor pans to drip rails and more. This adhesive does it all. Power through your project with this automotive body panel adhesive kit. Directions: Primer or Painted Surface - Clean with a VOC-compliant cleaner and scuff using an abrasive pad - Re-clean to remove debris before applying the seam sealer auto body compound - Pierce the seal, install the nozzle, then remove the metal seal - Insert the poly urethane adhesive sealant into a caulking gun and trim the nozzle - Apply the seam binding compound and tool it to achieve the desired finish - Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting Weld Through - Strip coatings around the weld flanges - Apply the auto body seam sealer and brush to cover all bare metal - Align and use a shunt clamp to hold before starting to weld Bare Metal - Clean with a VOC-compliant cleaner and grind or scuff weld nuggets or locations - Re-clean to remove debris before applying the automotive panel bond adhesive compound - Pierce the seal, install the nozzle, then remove the metal seal and trim the nozzle - Apply the paintable seam sealer and tool it to achieve the desired finish - Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting Additional Instructions: Seam seal compound requires an ambient temperature of