PLC Control Board FX1N-14MT DC 10 to 28V Programmable Relay Delay Module

Specification: Model: FX1N-14MT Power Supply: 10-28VDC Maximum memory capacity: 8000 steps Weight: Approx. 71g / 2.5oz Function: 1. Turn on the power, the relay 1 is closed after N seconds of closing; then the relay 2 is closed after N seconds of closing. 2. Turn on the power, the relay 1 is turned off after N seconds of closing; then the relay 2 is turned off after N seconds, and then cycles. 3. When the power is turned on, the relays 1 and 2 are not activated. When there is a signal or a button is triggered, the relay 1 is turned off after N seconds is closed; then the relay 2 is turned off after N seconds and then turned off until the next trigger, repeating the same action. By programming the signals 1, 2, any control of the relays 1 and 2 can be achieved. 4. When signal 1 has a signal, relay 1 is closed and relay 2 is turned off. 5. When signal 2 has a signal, relay 1 is turned off and relay 2 is closed. 6. Only the NPN sensor signal can be connected, and the sensor signal can be programmed to realize any control of the relay. 7. When signal 1 has a trigger, control relay 1; when signal 2 has a trigger, control relay 2. 8. Turn on the power, control the motor to rotate for N seconds, then reverse N seconds, and cycle. 9. When the signal 1 has a signal, the motor is controlled to rotate forward; when the signal 2 has a signal, the motor is reversed. Package List: 1 * Relay Module