Plank Wood Grain Pattern Wooden Digital Alarm Clock Multi-Functional LED Smart Alarm Clock USB Supply Sound Control Alarm Clock Office Decoration Digi

Voice-activated digital LED alarm clock, a simple and elegant digital product made of fiber density board. Introduction: A.Time setting: (please refer to the manual) B.Date and alarm settings C.dP-1. dP-2, two mode conversions D. Power saving mode: SD function (please refer to the manual) * Temperature display setting: The default temperature display unit is (degrees Celsius). You can also switch to Fahrenheit. (please refer to the manual) * Voice control function: The word function can only be used in the power saving mode. * Anti-interference function: In the power-saving mode, in order not to disturb other people, just tap the top of the alarm clock to activate the alarm display. * Reset Button: When the operation is abnormal, the RESET button restores the factory settings after the power is turned off. Electrical Parameters: * Power adapter requirements: input voltage: AC110V~AC240V, 50 / 60HZ. * Output voltage: DC5V / 500MA~1000MA. * Select battery power requirement: AAA * 4 battery standby. * In voice control mode, when the close sound is greater than 60 decibels, the display can be woken up. * Working temperature: 0°C~ + 50°C Note: * Please use in dry and ventilated environment, pay attention to moisture, not bumpy, high temperature; be careful not to drop to avoid damage. * When using this product, if the display is dark or flickering, the battery is low and the battery should be replaced. Prevent battery leakage and prevent damage to the product. * If the normal running time cannot be maintained during a power failure, check if the internal battery (model: CR2032) is exhausted. Please replace the internal battery in time. * Use the product power adapter 5V / 500MA ~ 1000MA, the output plug matches the product socket.