TITLE:Dual Action Airbrush Kit 0.2mm/0.3mm/0.5mm Needle Air Brush Spray Gun Paint Art
SIZE:16cm*6.5cm
COLOUR:Copper Plating
WEIGHT:277g
MATERIAL:Copper
Package Included:
1 x Airbrush
1 x Nozzle Wrench
1 x Eye Dropper
1 x Instruction
1 x 0.3mm nozzle
1 x 0.5mm nozzle
1 x 0.5mm nozzle cap
1 x 0.3mm jet needle
1 x 0.5mm jet needle
1 x Fast joint
1 x Oil / water separator
1 x 1.5m Air hose
HOW TO SPRAY
1.Fill fluid in the cup after thinning appropriately.
2.Hold the airbrush lightly in you hand.
3.By pressing the main lever,a stream of air emerges.Then draw it backward gradually for Color atomization.
4.The spray pattern is in accordance with the distance between a work surface and a air brush.
5.For fine line spray,remove the needle cover and hold the air brush near a work surface.
MAINTENANCE
1.Empty the fluid cup and wash with water or solvent by a brush.
2.Refill cup with water or solvent,then block the needle cover with a finger and spray.The air flows backward into nozzle to clean the paints remained the air brush.
NOTE: Please debug the airbrush to the best state, and then use clean water to test, make sure the atomization is normal before using it. After use, please clean the airbrush to avoid clogging. And this item air compressor limited is 15-50 psi .(This item is not including the air compressor)
