Phihong DA60U-240A-R 24V 2.5A Lead Acid Battery Charger for Mobility Scooters, Electric Scooters and Electric Wheelchairs

The DA60U-240A-R is rated 24V/2.5A, is terminated with a 3 pin male XLR connector on the end of the output cable, works with AGM batteries, and comes in a compact, fan-less case measuring 6.14" x 3.11" x 1.77" and weighing under two pounds. With an operating temperature range of -25ºC to +50ºC it operates in the widest temperature range in the industry for comparably priced chargers. The DA60U-240A-R features include an automatic 12 hour shut-off for battery protection, built-in over-voltage, short-circuit, and over-temperature protection; compliance with FCC and CE emissions and noise levels; and compliance to the U.S. Department of Energy's (DOE's) and California's Energy Commission (CEC) requirements for battery charger efficiency. The DA series battery chargers are compliant with several critical safety standards, including: all relevant UL and CE safety specifications; the Rehabilitation Engineering and Assistive Technology Society of North America's (RESNA's) WC-2:2009 American National Standard for Wheelchairs with Electrical Systems, which is based on the requirements and test methods that the International Standards Organization (ISO) defined for the power and control systems designed into electrically powered wheelchairs and scooters (ISO 7176-14:2008); the Canadian Standards Association's (CSA's) C22.2 No.107.2-01 standard; and the European Committee for Electromechanical Standardization's EN60335-1 and EN60335-2-29 standards.