Pet UTI Test Strips - Easy@Home Dog Cat Urine Test Kit for at Home Urinary Tract Infection Testing 10 Parameters 50 Count

Easy@Home 10 Parameters Animal Urinalysis Reagent Strips are easy, accurate, fast urine test strips to which several different reagent areas are affixed. Easy@Home pet Urine Reagent Strips provide tests for Glucose, Bilirubin, Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protein, Urobilinogen, and Nitrite in Urine. Test results help you detect problems early, gain time for early treament and intervention for your pets. TEST PROCEDURE 1. Remove from the bottle only enough strips for immediate use and replace cap tightly. 2. Completely immerse reagent areas of the strip in fresh, well-mixed urine. Remove the strip immediately to avoid dissolving out the reagent areas. 3. While removing, touch the side of the strip against the rim of the urine container to remove excess urine. Blot the lengthwise edge of the strip on an absorbent paper towel to further remove excess urine and avoid running over (contamination from adjacent reagent pads.) 4. Compare each reagent area to its corresponding color block on the color chart and read at the times specified. Proper read time is critical for optimal results. 5. Obtain results by direct color chart comparison. Please Note Do not touch test areas of Urine Reagent Strips. Store at room temperature between 15°-30°C(59°-86°F) and out of direct sunlight. Do not use after expiration date. All unused strips must remain in the original bottle. Transfer to any container may cause reagent strips to deteriorate and become non-reactive. Do not remove desiccant from bottle. Do not open container until ready to use. SPECIMEN COLLECTION AND PREPARATION Collect urine in a clean container and test as soon as possible.The use of urine preservatives is not recommended. If testing cannot be performed within one hour after voiding, refrigerate the specimen immediately. Allow refrigerated specimen to return to room temperature before testing.