Performacide Hospital and Home Disinfectant 3 Pack - Just Add Water - No Rinse No Wipe No Residue - EPA Registered - Makes 3 Gallons

Performacide Hard Surface Disinfectant is for use on hard, non-porous surfaces as a Disinfectant, Sanitizer, Tuberculocide, Slimicide and Deodorizer. Performacide kills odor causing bacteria mold & mildew. Performacide uses a pre-measured pouch that when immersed in the corresponding amount of water creates a 100 ppm chlorine dioxide solution. Allow the pouch 60 minutes to reach full activation and the 100 ppm ClO2 solution lasts 15 days when stored in an oxidation-proof, dark closed or sealed container in a cool dark location. Using EPA label directions, Performacide can be diluted to 20 ppm for use as a sanitizer on non-food contact surfaces and 5 ppm for use as a sanitizer on food contact surfaces. For disinfecting, wet the area to be treated with a mop sponge, or pressurized tank sprayer and allow to air dry. This product can be applied to walls, floors, furniture, stainless steel, glass, vinyl, or other hard non-porous surfaces. For sanitizing hard non-porous, food contact surfaces dilute to 5 ppm and allow 5 minutes of exposure time. For sanitizing hard non-porous, non-food contact surfaces dilute solution to 20 ppm and allow 5 minutes of exposure time. Please see inner label instructions for dilution tables and ratios. To test activated solutions after storage or dilution use chlorine dioxide test strips for concentrations with a range of 0 ppm up to 500 ppm.