PEMENOL 5PCS OLED Display Module 128 x 64 OLED Display I2c 0.96inch Arduino OLED Display IIC Serial OLED Module with SSD1306 for Raspberry Pi and Microcontroller - Yellow Blue Light

PEMENOL 5PCS OLED Display Module 128 x 64 OLED Display I2c 0.96inch Arduino OLED Display IIC Serial OLED Module with SSD1306 for Raspberry Pi and Microcontroller - Yellow Blue Light

Was: $79.96
Now: $39.98
(No reviews yet) Write a Review
SKU:
JJ103870
UPC:
7.13721E+11
Condition:
New
Availability:
Free Shipping from the USA. Estimated 2-4 days delivery.
PEMENOL 5PCS OLED Display Module can be wide use widely use with arduino, 51 series, MSP430 series, STM32/2, CSR IC, etc. With 128 x 64 pixels high resolution, no need backlight and self-illumination, providing 180 degree clear display. High contrast through the use of innovative OLED technology in the large 0.96 inch display! Specifications: - Color: yellow blue light - Driver chip: SSD1306 - Interface Type: IIC / I2C-4PIN - High Resolution: 128 * 64 Pixels - Voltage: 3 V ~ 5 V DC - Viewing Angle: almost 180 degrees - Low power consumption : Full Screen 0.08 w - Operating Temperature: -30 Celsius ~ 70 Celsius - Many Control Chip Supports: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc Pin Definition: - GND: OLED Power Ground - VCC: OLED Power Positive 3.3-5 V - SCL: OLED IIC Clock - SDA: OLED IIC Data Line Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally.
!