PAULIN Inline RV Water Filter.Connect it easily with a standard water hose or faucet, without any leak, to get the best quality water for all your intended uses.
Features:
Reduces heavy metals and fluoride
Two-stage KDF and activated carbon filtering
Excellent for shorter, seasonal use
Installation:
1. Attach incoming water supply(hose) to filter with arrow pointing in direction of water flow.
2.Attach to RV or watercraft. Water filter can also be installed ahead of hose at faucet.
Store capped in cool place. Protect from freezing.
Note:
The filter universally fits all standard faucet.Install between flexible houses with water flowing in direction of arrow.
Do not use where water is micro-biologically unsafer or with water of unknown quality without adequate disinfection before or after the filter.
A regulator must be used to limit water pressure to 60psi or less.
We recommend replacing the filter every 3 months.However,the filter life depends on water there is a bad taste or smell even less than 3 months or the water flow is significantly reduced, please replace the filter.
Specification:
Service Flow: 0.5gpm
Capacity: 1056 gallons
Maximum Working Pressure: 60 psi
Operating Temperature: 30°F~100°F
Reduction: Chlorine Taste and Odor
Specified Challenge Concentration: 2.0mg/L ± 10%
Reduction Requirement: ?50%
