Paintless Dent Repair Kit - 43PCS Car Dent Puller Kit with Adjustable Golden Dent Lifter Puller and Bridge Dent Puller for Car Body Hail Dent Removal Dent Remover Automobile Body Repair

How to use the dent lifter dent puller? 1. Put the glue stick into 20W glue gun and connect the power source and preheat for 3-5 minutes. 2. According to the dent size to choose suitable dent puller glue tabs, you have 19 different sizes dent puller glue tabs, 3. Then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks. 4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 5. After the glue cooling, use a golden dent lifter puller ( or bridge dent puller) to align and press the puller to pull up the dent. Repeat the above steps until dents pop up. 6. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. 7. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with plastic shovel. Package Included: 43pcs 1 x Golden Dent Lifter dent puller 1 x Silver Bridge Dent Puller 1 x 20W Hot Melt Glue Gun 7 x Dent Puller Glue Tabs 8 x Black Dent Puller Glue Tabs 5 x Blue Dent Puller Glue Tabs 5 x Black Plastic Tab Down Pen 1 x Dent Puller Rubber Hammer 5 x Yellow Hot Melt Glue Sticks 5 x Black Hot Melt Glue Sticks 2 x Yellow Rubber Scraper 1 x Empty Alcohol Spray Bottle 1 x Black Clean Cloth 1 x Dent Puller Kit Tool Bag 1 x Operation Manual