Ozone-Free Ultraviolet Germicidal Light Sanitizer UVC Lamp 25 W E26/E27 with Stand and Remote Control

Power: 25 W Voltage: 110VWavelength: 253.7 nm The base timer could be set for 15, 30, 60 minutes. To set the timer, hold a desired time Delay button until the lamp blinks and the lamp will turn off in the set amount of time. Please PAIR the remote before using the lamp. To pair: 1. Turn the lamp switch on 2. Within 5 seconds after the device was powered up, press "On/Off" button once and then hold “On/Off” button for at least 3 sec to pair the device. If it blinks pairing is successful To unpair: 1. Within 5 seconds after the lamp is powered, press and hold the “Delay 15 min” button for at least 5 seconds 2. After the 5 seconds, the lamp will blink indicating that the unpairing is successful Warning: When using this lamp, don’t look directly at the working bulb. Prolonged exposure to UV rays can burn human and animal skin and damage eyes. Avoid touching the lamp tube; it might reduce the lifespan of the lamp. People/pets/plants can’t be exposed to the UVC light and must leave the room when the lamp works. READ SAFETY WARNINGS BEFORE YOU BUY: This unit should not be used for illumination purposes. Exposure to ultraviolet light can result in serious damage, including painful eye and skin irritations. If the lamp does not work, please send us a note via Amazon. We would be happy to help.