OWSOO 433 MHz Wireless Clone Switch Cloning Copy 433MHz Electric Gate Garage Door Opener Control Duplicator Portable Remote Control Key Fob

Program Instructions: 1. Delete the existing code of our remote duplicator 1)Click and Hold A and B buttons together - Led will flash 3 times. 2)Keep holding A button and release B button. 3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop. Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted ! 2. Clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct contact. 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks. 3)Blinks then goes into Steady and you have successfully cloned. (the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks, it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through. Specifications: Operating Voltage: DC12V Operating Current:12mA Button: 4 Buttons Battery: button battery (included) Wireless Communication: RF RF Frequency: 433 MHz Encoding Type: Self Copy Modulation System: ASK (Amplitude Modulation) Transmission Distance: 50-100m(Open space) Material: ABS+Metal Item Size: 4.8 * 4.8 * 1.5cm Package Size: Approx. 8.5*5*1.5cm/3.35*1.97*0.59in Package Weight: Approx. 23g/0.81oz Package List: 1* Remote Controller (with battery)