Outdoor Wireless Solar Light, Intelligent dynami Sensor, 8 LED Lighting Super Bright Motion Sensor Light, Wall Solar Light Outdoor Security Lighting - IP65 Waterproof Solar Light for Patio (2pack)

Functional Mode The solar panels are synthesized using single crystal silicon, and the light conversion rate is as high as 23%. Usually, in the case of sunlight, the solar energy is fully charged in just 8 hours. The irradiation time is 12 hours or more. You don't have to worry about the nighttime lighting time is not enough. The solar light remains off when there is no motion transition within 4 meters of the attachment. The solar spotlight is equipped with a motion sensor that automatically turns on dim light at sunset and turns to highlights when motion is detected. After that, the light will return to dim light 20 seconds when no action is detected. The light will automatically turn off and charge the battery again at sunrise. installation Step 1: Mounting bracket Use a power drill (not included) to create 3 holes on the mounting surface of your choice. Gently tap the three included wall plugs into the holes and secure the mounting brackets into the holes using the 3 screws provided. Note: It is recommended to install at 2.0-2.5 meters (6.5-8.2 feet) high. Step 2: Open Spotlight The switch is located on the back of the lamp holder. Press the switch and completely cover the solar panel with an opaque object. Test it and make sure the spotlight is on Step 3: Install Spotlight Install the spotlight on the mounting bracket. Adjust the lighting angle as needed. product manual Solar panel: 5V, 1.22W Lithium-ion battery: 4.2V, 2000mAh Number of LEDs: 8pcs Detection distance: up to 5 meters detection angle: 120 degrees Installation height: 2.0-2.5 m (6.5--8.2 ft) switch: ON/OFF Material: ABS plastic Working temperature: -10~ + 50C waterproof: IP65 Product size: 184.2 * 98.6 * 94.9 mm Net weight: 272 g