Omron G2R-1-S AC240-S- General Purpose Relay Plug-In Terminal Single Pole Double Throw Contacts 3.7 mA at 50 Hz and 3.2 mA at 60 Hz Rated Load Current 240 VAC Rated Load Voltage

This Omron G2R-1-S AC240(S) general purpose relay has plug-in terminals for a socket connection, single pole double throw (SPDT) contacts and is suitable for use with low voltage applications. This relay has an input current rating of 3.7 mA at 50 Hz and 3.2 mA at 60 Hz with a maximum load rating of 250VAC at 10 amp, and input of 240VAC. It has a built-in mechanical operation indicator to alert users to the operating status, and a nameplate for labeling. This general purpose relay is suitable for use in HVAC, appliance and security applications. Specifications Contact Form SPDT Input Current Rating at 50 Hz 3.7 mA Input Current Rating at 60 Hz 3.2 mA Input Voltage 240VAC Load Rating 250VAC, 10 amp Operating Temperature -40 to +70 degrees C Enclosure Type Unsealed Enclosure Dimensions* 35.5 x 13 x 29mm (H x W x D) Standards Met UL (Underwriter's Laboratories)CSA (Canadian Standards Association)VDE (Electrical, Electronic & Information Technologies)IEC (International Electrotechnical Commission)CE (European Conformity) *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Relay switches (also called an electrical relay or an electrical relay switch) use a small amount of power to control a larger source of power connected to electrical devices such as car motors, computers, and lighting installations. A basic relay switch has a control circuit with an electromagnetic coil and a load circuit with contacts and a lever. When current flows into the relay switch, it moves through the coil and a magnetic field is created, which causes the lever in the load circuit to move between contacts, either turning the device on or off. In a normally open (NO) relay switch, when power is supplied to the relay, the load circuit is closed and the power source connected to the relay is turned on. In a normally closed (NC) relay switch, when power is supplied to the relay, the load circuit is open and the power source connected to the relay is turned off. In other types of relay switches, non-moving parts such as transistors or semiconductors can be used as the control circuit to operate the switching mechanism. Relay switches can be controlled with an external switch, such as a light switch, or they can be connected to an automatic