OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool

Get the solder off and replace them with newer ones, which it is very common when soldering, so this solder sucker and solder wick will be your perfect companion to suck the solder away effectively. Suck the Solder Away Easily The solder sucker measures 7.48"X0.79", which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively. Clean the Solder in Detail 2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder. How to Use the Desoldering Pump Step 1: Press the plunger down until it is been locked and you will hear a click; Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid; Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger; Step 4: Repeat this process if necessary. How to Use the Solder Wick Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick; Step 2: Remove the wick once the solder has been absorbed; Step 3: Cut off the used part of the wick; Step 4: Repeat this process if needed Why Choose Us: All Our Products are Produced under Strict Quality Inspection 12-Month Worry-Free Warranty and Free Life-time Technical Support Professional After-Sales Team 99% Positive Amazon Feedback Package Included: 1* Solder Sucker 1* Solder Wick Warranty:45 days money-back and 12-month, worry-free Guarantee!