Omninmo Damaged Screw Extractor Kit, Stripped Screw Extractor Set, Titanium Extractor Broken Wire Maintenance Tools Stud DIY Screw Removal Tool, Broken Bolt Extractor and Screw Remover Set

Features: - Complete with Accessories: The kit includes a screw extractor bit for removing damaged, peeled or broken screws of all common sizes.The screw extractor set works with any drill and any size screw or bolt. - Improved Design: Damaged screw remover tool kit improves on the traditional design with a total of 5 drill sizes and full titanium plating.This titanium plated screw remover and extractor kit is made from High-Speed Steel HSS 4341, which have high hardness of 63hrc, it's durable and easily to remove any damaged screws. - Titanium Coating: Each drill has a hard titanium coating that increases the hardness of each bit, helping them penetrate tough metals, stay sharp longer and prevent rust and corrosion. - Simple to Do: set your drill to reverse/counterclockwise and use a slower drilling speed. Use a drill/polished tip to start extracting and drill down to create a clean hole. Switch the drill to the extraction tip and use consistent downward pressure (and slow speed) to "bite" the extraction tip into the damaged screw. What Material Can Be Taken Out? The extractor is made of 4341 high speed steel. Most screws on the market are iron and ordinary steel, which can be taken. If it is made of stainless steel, the bit end of the extractor can hardly be drilled, and take out screws are easy to slip, so it is not applicable. Please confirm the extracted objects material before purchasing! What Screw Cannot Taken Out? (A)Very rusty (B)stainless steel How To Operate And Use For Novices? The drill speed shall not be too fast, use low speed, hold strength and take out it. Usage Method 1.First drill hole with the bit end, and the rotation speed needs to be set according to different materials. Generally, the harder the material is usually, the lower the rotary speed of the electric drill is required. 2.When using the extractor end, turn the drill adjusted to reverse, and the speed should not be too fast, otherwise it is easy to slip. 3.If the hardness of the screw is high and drilling is difficult, you can use your own fried dough twist drill to drill the hole first, and then use the extractor to reverse and take it out. Specification: Material: High Speed Carbon Steel Standard: Metric Quantity: 5Pcs Magnetic: NO With Handle Or Not: No Package Include: 1 x Screw Extractor Set