Oil Change Pump Extractor-12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump for Changing Oil Oil Change Pump for Boat Bike Motorbike Tubes Truck RV ATV with Hose

?12V 60W Oil Extractor Pump?Included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps; Ideal for Motorcycles,Cars,Quads,Truck,Boat, Forklift,Generator,Tractor,Scooter and Other 12v Vehicles. ?Quick and Clean?Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use ?Specification?: Oil Diese extractor pump's Voltage: DC12V, Maximum current: 5A, Maximum power: 60W. 12V 60W Extractor Scavenge Suction Transfer Pump?Oil extractor Pump for Car?Boat, Motorcyle, Scooter, Quad Bike, Truck, Forklift, Generator, Tractor, Ride On Mower Etc Siphon.Perfect for quick and easy oil changes that you can do at home. ?Easy to Use?You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. ?Note?: 1.This quick extract-oil change pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous). 2.Warm up the engine for about 5 minutes to reduce the oil viscosity. 3. The working-period for this 12v oil pump/12voil transfer pump should not exceed 30 minutes. we recommend a short break after 10-20 minutes continuous usage to allow the unit to cool. 4.Turn off the engine and loosen the filler cap (for the time being) 5.Connect the power clip of the pump body directly to the battery 6. Do not pump fuel, petrol, paraffin or other easily en-flammable liquids-Danger! Do not pump water(no lubrication of the pump). Only pump warm motor-oil(40-60degrees) do not pump off motor-oil. 7.Remove the oil level gauge and insert the thin