Ocolor LCD Display for Xiaomi Redmi Note 10 4G Screen Replacement for Xiaomi Redmi Note 10s Touch Screen Digitizer Assembly with Tools (Not for Note 10 5G/10 Pro)[No Fingerprint Unlock Support]

Compatible:For Xiaomi Redmi Note 10 4G LCD Display.Items in the package:1 * Screen Replacement for Xiaomi Redmi Note 10s. 1 * Set of tools. Installation notes: Tip 1: Check if the Redmi Note 10 4G SCREEN is in good condition before installing and test it.Please do not remove the protective film of the display or overbend the IC cable during testing.Pay attention to static electricity problems, install the Redmi Note 10s screen assembly in an environment with fine static electricity. Before proceeding with installation, test the Note 10 4G lcd first and make sure that the mobile phone has been connected via ESD (electrostatic discharge). This prevents static electricity damage the electronic components of the phone. Tip 2: Simulation test. The M2101K7A replacement screen is in glass, which is fragile. It is strongly recommended to take the test before installation. Please simulate the test if the phone is disconnected (motherboard + LCD or screen), connect the audio cable and a new backup power supply, then turn on the test. If the test is normal, install it. If it cannot be viewed normally, contact us as soon as possible. Do not install the phone with the force. Tip 3: Do not bend the cable.During installation and test, make sure the LCD cable is not bent . A curvature greater than 90 degrees will cause a black view. Tip 4: Black screen phenomenon.If your phone has a black screen during the installation process, Keep the power button and the volume button simultaneously. If the phone vibrates, it is because the main cable is not installed correctly. Then reinstall the Redmi Note 10s LCD Display Replacement.