NuTone NWO15Z Smart Z-Wave Enabled Wall Outlet 15 Amp White

The NuTone NWO15Z Wall Outlet is wired in place of a standard duplex receptacle. This device allows remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all times). The 2008 National Electric Code Compliance requires that all new installations of single and multi-family homes install tamper-resistant outlets. The NWO15Z is fully compliant with this code. Requires Z-Wave compatible gateway (sold separately). Range: Up to 100 feet between wireless gateway and/or the closest Z-Wave device. Maximum load: Incandescent 600W, 120 VAC. Resistive: 15 amps (1800W), 120 VAC. Motor: 1/2 H.P., 120 VAC. NuTone' s family of Z-Wave certified wireless lighting, security and control products bring a new level of intelligent wire-free capability to commercial and residential environments. The Z-Wave wireless protocol is an international wireless standard for remote home automation, security and other applications. Embedded in each device, the Z-Wave smart chip enables two-way RF communication among hundreds of Z-Wave enabled devices, allowing products and services from multiple manufacturers to work seamlessly. NuTone Z-Wave products are easy to install, and allow dealers to create an integrated wireless network with nearly limitless expansion and interoperability with security and health monitoring systems, energy management, home entertainment, appliances, and more. All products operate at the standard 908.42 MHz frequency, supporting network wide inclusion and are security system compatible. All NuTone Z-Wave products integrate with other NuTone Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).