NOYITO Voltage to Frequency Module 0 10V to 0 10KHz Signal Conversion Module

Feature 1. Input voltage, output frequency signal. 2. The output signal can be fine-tuned, and the potentiometer can be adjusted to calibrate the correspondence between voltage and frequency. 3. The output of this module can be supplied to the driver for pulse signal. Wiring with the driver: OC-OUT: PUL- or PUL12-30V connected to the driver. Connect the driver's PUL+ or the common terminal +5V. (When 12V is powered, it is necessary to string a 330R resistor. When 13-24V is supplied, it is necessary to string a 2.7K resistor to limit the current.) Technical Parameters: Working voltage: 13.5V-30V. Input controllable voltage range: 0-10V. Output frequency range: 0-10KHz. Size: 33x34mm. Wiring instructions: VCC: Power supply +. GND: Power supply - / ground. IN+: Input voltage + . IN-: Input ground. OCOUT: Signal collector output port (use this output port when equipped with a driver). FOUT: Frequency output port (common frequency output port). Instructions: The frequency pulse signal is connected to F, and there is a corresponding voltage output at the VOUT terminal. Input and output correspondence: 1V = 1KHz. 10V = 10KHz. If there is a deviation in the correspondence when using, you can adjust the potentiometer on the board to calibrate. Package Included: 1Pcs NOYITO Voltage to Frequency Module