Noonhorse 44 Key RGB Led Strip Light Remote Controller RGB LED Light Remote IR Led Remote Replacement for RGB 3528 5050 2835 LED Strip Lights, Multicolor

44 keys led light remote replacement for strip lights Package: 1 pcs 44 Key IR led remote as shown on main picture,it requires you to still have the control box to received the signal which is NOT included Remote distance: within (6m) How to confirm whether it's compatible Since all our led light remote controllers have been tested by machine, the defective rate almost zero.but if the remote doesn't work,please check that: 1. make sure that your previous led lights remote is 44 keys, similar look as this one.make sure the connector pins are 4 pins. 2. if your previous led remote bottom has words"RF remote controller",then this one is not the compatible because this remote signal can't penetrate the obstacles such as wall while RF remote can. Troubleshooting 1..properly connect the led lights to white control box(not included here), ARROW TO ARROW, otherwise the led light won't light up and the remote won't work. 2.there is transparent plastic sheet inserted into the battery door, please remove it first before using and then press power button. 3. Pls aim the led remote controller to the control box receiver instead of aiming the remote to other parts of led strips.So that the control box can receive signals from remote. and distance between remote and control box is within 6 meters. 4.If the color buttons on ir remote do not response to the right light color, powered off the remote and press the bottom right button(Fade 7) for a few seconds.The light strip will flash once.after that,switch on the remote and it can control right colors. This will cycle the light colors to different buttons. or.