Non Slip Bath Tub Stickers Strips 20 Pack Anti Slip Shower Treads Bath Safety Stickers Tape Slip Resistant Decals for Tub Pools Floor Bathrooms Stairs to Prevent Slippery

ATTENTION PLEASE: The non slip sticker tape are ONLY designed for flat and smooth surfaces. Before installation, please keep the surface DRY and CLEAN before using. Otherwise, it will affect the strip stickiness and use effect. We recommend after installation, you have to wait at least 24 hours to make it firm enough and then use, 48 hours will be better. Function: Non-slip bath sticker can reduce the chance of slipping on all kinds of slippery surfaces for the your whole family. ONLY for any flat smooth surface, such as bathtubs, bathroom floors, pools, stairs, doorway, etc. Specifications: Color: Clear Material: PEVA Package Size: 8.5” × 4.5” Package Including: 20 × Nonslip shower stickers Each Sticker Size: 8” × 0.8” Thickness: 0.08” Service Life: 2-3 Years in general purpose How to Install Safety Stickers: 1.Before installation, clean the surface and wipe with alcohol, make sure it must be cleaned away from any dust, oil or any other residue. Let it dry ALL the way. 2.Make sure your hands are dry and clean, then peel off the paper on the rear side of the sticker to expose the glue and "barely" touch the glue part of the sticker before you place it. Oily fingers will affect the glue. 3.Apply the sticker to the surface, firmly press down on the entire sticker, make sure every corner must be pressed, holding it in place. Once it's down on the surface, try not to pull it up and stick down again. 4.Allow the treads to stand after applying them for at least 24 hours before wetting them, to ensure the adhesive will fully stick, 48 hours will be better. What are you waiting for? Come and get our Safety Nonslip Bath Stickers!