NGW-1pc Current-to-Voltage Module 4-20MA to 0-5V Linear Conversion Transmitter Module

Current-to-voltage signal module Module parameters 1, the working voltage: 9V ~ 24V 2. Input current: (4.00MA to 20.00MA/0.00mA to 20.00mA) 3, the output voltage: (0.00V ~ 5.00V/0.00V ~ 10.00V). 4. Control mode: 4.00MA (milliampere) ~ 20.00MA (milliampere) input is converted to the corresponding (0.00V ~ 5.00V/0.00V ~ 10.00V). 5, the output method: 1. J1 pad on the circuit board: open circuit (input 4.00mA, ~ 20.00mA); short circuit (input 0.00mA to 20.00mA), the default is open circuit 2. J2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit. 6, the scope of application: current signal to voltage signal; remote data acquisition and control equipment; 7. Size: (long) 26mm * (width) 23mm * (high) 10mm 8, module interface: 24V: Positive power supply interface (9V ~ 24V). G: Power ground connector. IN: Signal input interface (4.00MA ~ 20.00MA/0.00MA ~ 20.00MA). G: Power ground connector. OUT: Signal output interface (0.00V to 5.00V/0.00V to 10.00V). G: Power ground connector. Note: When the output is from 0.00V to 10.00V, the power supply voltage must be supplied with 15V.