delivery
1X receiver
1X remote control with battery of range 200M (if you need extra remote control, please tell us)
parameter
Working temperature: -20'C- + 70'C
> Maximum operating current: 10A
Working frequency: 433MHz
Working Voltage Range of Relays: AC110 ~ 240V or DC0 ~ 28V (Relay Output Can Control DC and AC Devices)
Antenna: with internal antenna
Sensitivity: ?-107dBm
Coding type: learning code
About control modes
Momentary: press the button is ON. loosen your finger is OFF
Toggle: press one button for one time is ON. press the same button again is OFF
Latched: press one button is ON , press another button is OFF.
Set Control mode
Toggle: 1 Connect ON, 2 Connect ON
Momentary: 1 or 2 is not connected.
Latch: 1 Connect ON, 2 disconnect.
Toggle(1,2 channel) + momentary(3,4 channel): 1 disconnect, 2 connect ON
To learn
1. Press the learn button of the receiver until the LED indicator lights up, the receiver remains in the status of learning. 2. Then you can press any button. If the LED flashes 6 times, it means that the learning is successful.
Delete code
If you lose your remote, you can also delete code.
Press the button on the receiver until the LED light flashes slowly, then release the button, then LED light remains slowly flashing. It means that all stored codes have been deleted successfully.
NEW 4Channel DC 12V 24V 433MHz 200M Range Wireless Remote Control Switch Radio Remote Control Transmitter Wireless Switch System with Radio Receiver Holder for Gate Controllers Barriers DC12V
Was:
$105.08
Now:
$52.54
- SKU:
- M138248
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.