Operation Guide
- The fan has two buttons, one on the left to adjust the 4-wind speed and another one on the right to adjust 3 brightness.
- The left button,press once for low speed, press twice for middle speed,press three times for high speed, press four times for natural wind.
- The right button,press once on the right side for cold light, press twice for warm light, press three times for nautral light .
- Long press the light button(right button) to open the oscillating mode .
- Long press the wind press(left button)to open the timer mode,setting in 2 hour,4 hour and 6 hour.
Accessories Lists
Fan*1
Manual*1
Tripod*1
Type C*1
PC bag*1
Hook*1
Remote control*1
Remote control battery*1
Battery installation steps
1. Insert a flat and hard object such as a coin into the groove of the back cover, and turn it to the left to remove the back cover.
2. Insert the battery with the positive side facing out.
3. Align the buckle positions and put the back cover into the remote control buckle design.
4. Turn the back cover to the right by using a coin, then the back cover is closed.
