Nashone Temperature Controlled Outlet,Digital Wireless Thermostat Built in Temp Sensor 3 Prong Plug with Heating Cooling Mode Outlet Thermostat LCD Display Easy Review

How to code: Remote controller 1.Put 2 pcs 1.5V AAA batteries into the remote controller. 2.Select heating mode or cooling mode by pressing the ON/OFF. 3.Long press ON and OFF at the same time to confirm. 4.?/? can be switchable by press the ON/OFF. 5.Long press ON and OFF at the same time to confirm. Outlet 1.Plug in the termostat and red LED indicator start to flash. 2.Auto code sucessfully when red LED stop blink. 3.Set up target temp at your needs. Notice: There are 2 ways to reset your mode.?Reinstall the battery again or ?Long press the ON or OFF,and then long press ON and OFF at the same time. Features: 1.LCD display with green backlight. 2.Plug and play type, no need installation. 3.Portable design, hold in hand/ stand on table/wall mounted. 4.No need to program, easy operation. 5.Automatic learn code. 6.High/low temperature alarm. 7.Display the current temperature and target temperature. 8.RF 433Mhz RF technology. 9.Free to choose between ?/?. 10.Free to choose Auto Operation or Always ON/OFF function (Remote control). 11.Always ON: the connected heater will be always heating. 12.Always OFF: the connected heater will be always OFF. 13.Power outage will not affect the settings. 14.Low battery warning, ?/? symbol will be flashing when the battery is lower than 2.7V. 15.Remote control is powered by 2pcs 1.5V AAA battery.(not included) Specification: Maximum rating: 110V/15A/60Hz, 1800W Max. Current temp.range: 0?~60? or 32?~140?. Target temp.range: 0?~60? or 32?~140?. Temperature resolution: ±1? or ±1?. Each press of button: ±1? or ±1?. Transmission frequency: 433.92 Mhz. Maximum range: 20m in open area. Thermostat dimension: 3.86in*1.97*1.14in Controller dimension: 4.8in*1.65in*0.79in Thermostat Weight : 0.26lb Controller Weight : 0.12lb