Mumaxun 10pcs F Type Male RF Connector Twist On Coax Coaxial Cable Adapter with Coaxial Cable Stripper Cutter Tool RG58 RG6 RG59 Quad

F-Type Male RF Connector F connector thread Inner Dia:9mm/ 3/8" End Thread inner Dia:6mm/ 1/4" Material: Copper with Nickel plating Type: F-Type Male RF Connector Easy installation without compression/crimper tool Fit for RG6 cable and cables of television systems, satellite, HDTV, etc. Coaxial Cable Stripper Blade's Depth:You may use the hex wrench, which is installed on the bottom of the tool to adjust the blade's depth. Insert the hex wrench into the blade depth adjuster on the bottom of the stripper, then rotate the hex wrench clockwise (to cut smaller cable) or counterclockwise (to cut larger cable). Repeat above steps to set the other blade. Stripping Cable: 1. The V-block is reversible. Use hex wrench to push the V-block out of the housing, align the character on the V-block with the arrow, then insert the V-block into its housing. The indicated arrow recommended the RG cable size mark in front of the V-block. 6=RG6 (5C2V), 8=RG58 (3C2V), 9=RG59/62 D=RG174. 2. Press the knurled portion on the upper jaw to open the stripper's jaws. 3. Insert the cable you want to strip through the V-block until the cable reaches the V-shaped cable guide. Then release the upper jaw to close the jaws. 4. Insert your index finger into the stripper's finger ring, turn the stripper clockwise 1-4 times. The cable's insulation is cut while you turn the stripper. 5.Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor. Package inlcudel: 10pc x F-Type Male RF Connector 1pc x Coaxial Cable Stripper