MroMax 0.4mm 3D Printer Nozzle Head M6 Thread Replacement for V5 V6 3mm Filament Extruder Print- Brass Nozzle 4Pcs

Feature: The hole of print nozzle is consistent size and machining, the thread is clean and well formed. Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc. Specification: Material: Brass Screw Thread: M6 Nozzle Diameter: 0.4mm/0.02inch Input Diameter: 3.2mm/0.13inch Filament Diameter: 3mm/0.12inch for E3D V5 V6 Total Dimension: 12.5x7mm / 0.5x0.28 inch (L*D) NOTE: Small accessories, please keep away from kids. After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. How to Replace Nozzles? 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.Notice: Please don’t touch the old nozzle and heat block to avoid scalding. 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.