Features:
1. Wire the Normally Open Limited to the External Button Pin ( U--S--D--GND) make your motor Forwards Reverse Cycle.
2. Original State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON).
3. If you don't need wire the Limited Switch, you need connect the UP Down and COM with a Line, we have connect it before we ship out ,if you need use it take away the line that is ok.
4. When the receiver output state is "Latched", we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
5. Out State: Momentary Toggle Latched Adjusted by the Jumper on the Receiver.
Specifications:
Working Voltage: DC 12V-36V
Receiver color: White
Shell material: ABS
Working Current: 48ma
Quiescent current:16ma
Max Load: Recommend load less than 5A (60W)
Frequency: 433.92Mhz
Operation temperature: -10 degree~ +60 degree
Brushless motors not supported
Remote battery: 2* CR2016 batteries
Remote control distance: 10m~50m
Model switching:
Momentary Model:
Momentary----------Jumper on "1&2"
Press button"Up", the Motor Forward, Release is Stop.
Press Button "Down", the Motor Reverse, Release is Stop.
Latched Model:
Latched-----------Jumper on "3&4"
Press button "Up", the Motor Forward, Press Button "Stop" is stop.
Press Button "Up", the Motor Reverse, Press Button"Stop" is stop
Package include:
1x DC12V-36V Wireless Receiver
1x Remote control
1. Wire the Normally Open Limited to the External Button Pin ( U--S--D--GND) make your motor Forwards Reverse Cycle.
2. Original State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON).
3. If you don't need wire the Limited Switch, you need connect the UP Down and COM with a Line, we have connect it before we ship out ,if you need use it take away the line that is ok.
4. When the receiver output state is "Latched", we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
5. Out State: Momentary Toggle Latched Adjusted by the Jumper on the Receiver.
Specifications:
Working Voltage: DC 12V-36V
Receiver color: White
Shell material: ABS
Working Current: 48ma
Quiescent current:16ma
Max Load: Recommend load less than 5A (60W)
Frequency: 433.92Mhz
Operation temperature: -10 degree~ +60 degree
Brushless motors not supported
Remote battery: 2* CR2016 batteries
Remote control distance: 10m~50m
Model switching:
Momentary Model:
Momentary----------Jumper on "1&2"
Press button"Up", the Motor Forward, Release is Stop.
Press Button "Down", the Motor Reverse, Release is Stop.
Latched Model:
Latched-----------Jumper on "3&4"
Press button "Up", the Motor Forward, Press Button "Stop" is stop.
Press Button "Up", the Motor Reverse, Press Button"Stop" is stop
Package include:
1x DC12V-36V Wireless Receiver
1x Remote control
