With USB fast charge output:
Applicable to BC1.2, Apple, Samsung agreement,
Compatible with Qualcomm QC2.0 and QC3.0.
Compatible with Huawei Fast Charge Protocol FCP
Compatible with Samsung fast charging protocol AFC
With motorcycle battery voltage detection, display, low-voltage alarm function.
Air pressure setting range: 0.1~6.0BA
Temperature setting range: 60°C~100°C
Working temperature: -20?~80?
Storage temperature: -30?~85?
Power supply voltage: DC 12V
Output voltage: DC 12V, 9V, 5V
Frequency: 433.92MHz±20.00MHZ
Bracket Installation Instructions
1. Unscrew the 2 screws, install the motorcycle/electric car/bicycle and tighten;
2. Turn the mounting head of the bracket to the position you need, and confirm that the bracket is firm;
3. Install the tire pressure receiver on the bracket, tighten it and lock it; use the ball head to rotate the tuning knob, move the joint part, and adjust the appropriate angle
Power Supply Installation Instructions
1. During installation, the power cord must be connected behind the ignition switch, and the power will be cut off automatically after it is turned off. The red is connected to the 12V positive pole, and the black is grounded.
2. Install the fixing bracket on the handlebar and lock it tightly. Install the host on the bracket, adjust the angle and lock it.
3. Install the sensor when the host is turned on. First install the anti-tamper ring into the valve nozzle, then install the sensor in place on the valve and tighten, then screw the anti-tamper ring back and tighten. If it is found that the pressure is not displayed in the corresponding position on the main unit, reinstall the sensor to the corresponding position.
Package Included:
1 x host
1 x stand
2 x sensors
1 x wrench
2 x nuts
1 x instruction manual
