MITMOR Automatic Soap Dispenser Touchless Auto Hand Soap Dispenser with IR Infrared Sensor IP67 Waterproof 300ml Automatic Liquid Soap Dispenser Elec

Important note 1. The soap dispenser requires a 4xAAA battery. When installing, check the "close" and "open" symbols on the battery and soap dispenser and install correctly. 2. If the soap dispenser is unable to dispense the soap properly, pry the soap dispenser nozzle with your hand so that the straw inside can contact the air to dispense the soap. Touchless soap dispenser main functions 1.Touch-free automatic 2. No messy spills 3. No drip 4. Easy to refill-no need for custom soap! 5.Color: As the picture shows What's in the package? 1x Soap Dispenser 1x User Manual Operating procedure 1. Turn the cover on the bottom of the automatic dish soap dispenser. Insert four AAA 1.5V batteries and close the cover. 2. Press the bottom button. The light flashes. The device is now working properly. 3. Open the upper case of the main unit and add liquid. 4. If using for the first time, try a few times first. Then the liquid fills the hose and comes out. 5. The distance from the hand to the sensor is about 5CM. Discharge about 1 ml of liquid each time. If you need more liquid, hold it for about 2 seconds. Then more liquid will come out soon. Note 1. If the liquid level is low, add more liquid. Otherwise, the soap dispenser will not drain liquid. 2. If it does not work, replace the battery regularly. 3. To avoid serious damage, do not shake the device. 4. Remove the battery if you are not going to use it for a long time. 5. If the liquid is too thick, it must be diluted with water. 6. Normal working temperature is 3 ? ~ 40 ?