Mini Pottery Wheel Machine USB Hand Make Ceramic Pottery Making Machine of 02000 RPMmin for DIY Art Clay Making Working Machine Craft

USB Mini Pottery Wheel machine Specification: Type: Pottery Making Machine Power: USB cable, 5V Machine size: 16*11*9cm Turntable size: 4.5cm (thickness 0.7cm) Fuselage material: plastic Turntable material: aluminium alloy Speed: 0-2000 rpm/min (no-load) Weight: about 700g Speed control mode: power supply mode of continuously variable speed Knob: rated DC Current: 1A Features: Small size, portable to take with. Easy to operate with USB cable. 0-2000 rpm/min (no-load). Aluminium alloy turntabl, durable and stable. Package Included: 1 x Pottery Making Machine Note: Operation note: 1. Roll the clay into a cylinder, fix it in the center of the turntable and press it. 2. Use the ceramic tool alignment center to slowly open the hole, then slightly expand outward a bit. 3. Use ceramic tools to shape and trim the profile of your work. 4. Keep the rotating disc at constant speed and dry the work surface with a spray gun/ hot air gun. 5. Use tools from top to bottom to modify, and finally fix the bottom 6.After the work is completed, the work can be cut off with a scraper or a knife-edge tool Suggestions: 1. Get smaller pieces of mud 2. Don't rotate too fast and slow at a slower speed. 3. When shaping, you can stretch it out a bit thicker and then thin it out slowly. 4. Use clay tools to assist molding, less water.