The 360°Mini Digital Protractor Inclinometer with Metal Structure
Features:
Ultra-slim size, all Zinc aluminum alloy frame structure.
High accuracy and resolution.
Degree and Percentage of slope in conversion.
Large and clear LCD display.
Portable design and simple operation.
Absolute & relative measurement modes.
Measured data hold.
Displayed readings remain upright to enable easy viewing at all angles.
Specifications:
all Zinc aluminum alloy frame structure
The strong magnets are built in the bottom surface
Resolution: 0.1°
Range: 0 ~ 90° x 4 quadrants (360°)
Operating Temperature: 0 ~ 40 ?
Operating Humidity: 40 ~ 80% RH
Power: 3V CR2032 Batteries
Dimensions: approx. 52 x 52 x 26 mm/2.04 x 2.04 x 0.98 inch
Applications:
Drive line Measurement.
Race car wing and chassis adjustment.
Drainage angles and run-off slopes.
Tool setting on Lathes.
Setting blade angle of Circular Saws/Miter Saws.
Wheel alignment.
Setting work piece angle for milling.
Platform monitoring.
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table.
Operating Instructions:
1.Press the ON/OFF button, it turns on, and the LCD displays absolute horizontal angle. Press ON/OFF button again, it turn off.
2.Put the instrument on the horizontal stand, and press the ZERO button, the value returns to zero, and the read-out is the angle value measured angle value relatively to the horizontal stand.
3.Measurement initially displays 0.0°on the LCD at the beginning, when it displayson the left side on the right side, it means the left side is higher and right side lower; when it displays on
