milKit Tubeless Rim Tape - 11yd 10m Rim Strip Roll - Extra Strong Bicycle Rim Tape 21mm -25mm - 29mm - 32mm Available Widths 32

???? milKit rim tape offers quick and easy conversion of your rim to tubeless and guarantees a reliable and long-lasting performance. We designed our rim tape to be very strong and reliable for an airtight fit, but with enough flexibility to make installation quick and easy. ???? milKit rim tape is available in the four most popular widths on 10m/11yd rolls. One role is sufficient to set up 4-5 wheels. Using milKit rim tape: 1. Clean rim thoroughly and ensure it is dry 2. Install rim tape by pushing it firmly into the rim       - It must be tight and ensure there are no gaps or air trapped underneath       - Make sure it overlaps at least 10?cm?/?4?in over the valve hole, it's better to have a longer overlap than shorter       - Use two layers for high pressure wheels (above 8 bar / 120 psi) 3. Cut rim tape at a 45° angle for best adhesion and flexibility 4. Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim ?? Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. ???? Using too narrow rim tape can lead to air leaking between rim and tape - which can be frustrating. If it is too wide it can make it difficult for the tire to sit correctly.