Product name: touch sensor switch(Stepless Dimming)
What's the Touch Switch:
Touch switch, just touch it!
The touch switch is rated for 2.5A MAX /DC3.6-15V.
What's the Touch Switch Used for:
Most often the Stepless Dimming switch is used for lights (Such as table lamps, ceiling lights, pendant lights and other smart appliances)
About Stepless Dimming type:
1.The light is off when connecting to electricity. Click it (time < 550ms) once to initiate it with the light on. Click it again to let it be off. Continue to cycle.
2.The initial brightness is 100% of the maximum brightness.
3.Touch and hold it (time > 550ms) to initiate stepless dimming control. The brightness increases when touching and holding, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at maximum level. The brightness decreases when touching and holding again, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at minimum level. Continue to cycle.
What's Note:
If you meet the static electricity problem, you can let the switch housing be grounded.
*The touch switch doesn't work with wet or damp fingers.
*The touch switch cannot be used in AC circuit. Don't exceed the rating volts!
Specifications:
Color: White
Head diameter:0.78" ( 20mm )
Mounting hole size: 0.62" ( 16mm )
Depth size: 0.39" ( 10mm )
Switch Type: Stepless Dimming
Input Voltage: DC3.6V-15V
Output Current: 2.5A MAX
LED voltage: DC 3.6V-15V
Enclosure material: Plastic
Package
2 x Led Touch Switch
Warm tips.
Be sure to turn off the power before installation, maintenance, repair and cleaning.