Features: Two working voltages: USB 5V or DC 7-32V,any one is ok Power <1W and quiescent current: 80mA breaking current <10A, breaking voltage <250 V,its dry contact relay,current dont through the board,without voltage in output.for inductive load such as a lamp motor, the maximum is 5A. If your load is large (motor, heater, etc.), Please use a high current contactor for the load . Working temperature: -40 to 70 degrees Operating humidity: 40% to 80% relative humidity Dimensions: 117 * 80 * 27mm
Function: 1.rename the device, rename each channel, set working mode by channel, you can control 2 garages and 2 lights with 1 switch. 2.Inching Function: Press the relay open by mobile phone, then immediately stop the pull-on (default one second), you can set the advance time from 0.5 seconds to 1 hour 3. Self-locking mode: enable / disable 4 connected devices separately. 4. Interlock Mode: Turn on one device each time and turn off the others at the same time. 5.Set 8 times for automatic control: can create 8 single / repeat / countdown enabled rs time to automatically turn on / off devices at specified time. And the timers can work autonomously even if the network is not available 6.Sync Status: real-time device status provided to the App 7.Voice against, the Wifi smart switch can work perfectly with devices Alexa enabled such as Echo / Tap / Dot as well as Google home. With just a simple voice command, Alexa or Google Assistant will work for you, simultaneously turning on / off the connected devices.