Mercase Boom Arm, Desktop Mic Stand, Adjustable Scissor Microphone Arm Stand with Desk Mount Clamp, 3/8" to 5/8" Adapter for Blue Yeti HyperX QuadCast

Rotatable base: There are a circle of concave dots around the round hole of the base, these dots can help the boom position, and it is not easy to slide. Hidden wire ferrules: There are 5 wire ferrules in the set, these wire ferrules can be inserted into the gap of the boom, better hidden wire, the use is to look neater and upscale. Anti-scratch: The base of the professional microphone boom has a built-in anti-scratch pad, which will not scratch your table when using it. Durable Boom: Mercase boom has a built-in spring and an external hexagon screw to adjust the tightness, so there is no need to worry about the load-bearing weakening caused by the rapid aging and deformation of the spring. Wide Compatibility: The 5/8" connector is compatible with many microphones, such as Blue Yeti /Snowball/Yeti Nano, Razer Seiren Mini, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, HyperX QuadCast, etc. Microphone clip: The maximum diameter of the microphone clip is 32mm, which is compatible with most handheld microphones, and your handheld microphone is also suitable for this boom. Mercase Microphone Boom is easy to install: 1. Snap the C-clip into the edge of the table and tighten the bottom screw to secure the base. 2. Insert the boom into the hole in the base. 3. Use a hex wrench to tighten the screws on the boom. 4. Use the wire clip to secure the wire.