MEAN WELL LPV-100-24 C.V Single Output Waterproof 100.8Watts 4.2Amp 24VDC LED Strip Driver IP67 Suitable for LED Strips

MEAN WELL LP Series Constant Voltage LPV-100-24 LED Driver, 100W 24V, Be used for LED Strips EU RoHS: Compliant ECCN (US): EAR99 Type: Constant Voltage Input/Output Type: AC/DC Number of Outputs: 1 Output Voltage Range (VDC): 24(Typ) Maximum Output Current (mA): 4200 Output Power (W): 100.8 Input Voltage Range: 90VAC to 264VAC|127VDC to 370VDC Dimming: No Efficiency (%): 88(Typ) Termination Style: Lead Wire IP Rating: IP67 Warranty: 2Year Minimum Operating Temperature (°C): -25 Maximum Operating Temperature (°C): 70 Product Weight (g): 630 Pin Count: 4 Mounting: Screw Package Height: 37 Package Length: 190 Package Width: 52 PCB changed: 4 Lead Shape: Lead Wire Be Used as a 100W 24V LED Driver, UL Approved Flickering LED Lights: A Troubleshooting Guide Step One – Identify Your Current Setup Check your lamps, wires, ballast/driver, and tombstones for bad connections or loose wires. A common reason for flickering LEDs is a loose connection within the circuit. Addressing a power-connection issue or loose wire to the driver circuit will often easily resolve the flickering or no-power issue. Ensure the lamp is screwed correctly in place and the connection point hasn’t become loose over its lifetime. Step Two – Narrow Down Other Potential Points of Failure If your wiring and connections are working, the issue may be resolved by checking for incompatible switches. There are a number of other potential points of failure resulting in the flickering or power issues with your LED lamps, including: 1. Incompatible switches 2. Driver components 3. Relaxation oscillator 4. Incorrect power/surge wattage 5. Changing voltage levels. Please NOTE the PSEUDO Soldering will cause Flicker as well, Please use high quality solder bar..