MCNBLK Solar Lights Outdoor Motion Sensor 100 LED 270° Wide Angle 3 Optional Modes IP65 Waterproof Easy to Install 4 Pack

MCNBLK Intelligent Modes of Solar lights 1.Induction Mode · When the temperature of the human body is sensed, the lights are automatically turned on, the brightness is 100%, and the lighting time is about 20s. 2.Dim Light & Induction Mode · When the temperature of the human body is sensed, all the lights are on and the brightness is 100%. After the lights are on for about 20s, the lights are always on and the brightness is 10%. 3.Constant Dim Light Mode · No induction status, the light is always on, the brightness is 30%. 4. Finally, Light-off Mode ·The shutdown state. Warm Tips: In order to ensure maximum effective use, the first model is recommended. Tips 1. Before the first use, please make sure the solar light can be charged with sufficient sunlight for 12 hours. 2. When the battery is exhausted, switch off the light first, and then recharge it with sufficient sunlight for 2-3 days. 3. If you want to check whether the product can work normally or not, please turn it on by pressing the button, then cover the solar panel with your hands in the daytime or put it in a dark environment. 4. Please clean the solar panel regularly to ensure the efficiency of charging. Attention Please note that the following environment is not recommended for installation. ?Glass room (although there is sunlight, the glass is blocked, which affects the light intensity and thus affects the battery charging.) ?Monitoring area (monitoring the shooting area is not suitable for installation, monitoring has infrared rays, which will affect the brightness of the lights.) ?Under the tile eaves (There should not be tile eaves, trees, wires, and other shelters above the area where the wall lamp is installed, affecting charging.)