MC-6S 1-6S Lipo Battery Voltage Checker Receiver Signal Tester for Works as a Receiver Tester Allowing You to Check S.Bus, PPM, PWM and DSM Satellites for Correct Functionality(MC-6S)

The MC-6S is an easy to use, compact 6S Cell Checker with built in receiver and satellite checking function. Simply connect the balance lead from you LiPO/LiFE battery to the balance plug pins to get an instant read out of your batteries cell voltage. The MC-6S also works as a Receiver tester allowing you to check S.Bus, PPM, PWM and DSM Satellites for correct functionality. An Ideal tool for diagnosing receiver issued when building FPV racing drones. Specification: Voltage Input: 5-25V Current Consumption: 10mAh Dimension: 45X31X10mm Mode of Receiver Output: S.bus,DSM1024,DSM2048,PPM,PWM Cell Checker: Up to 6S USB Input: Micro USB & USB-C Packaging Included: 1X MC-6S Checker Instructions for use voltage and receiver signal checker use 1.44inch lcd.It can be used in checking Lipo battery voltage and receiver signal outpue 2)Technicla Data Votage input:5-25v Current Consumption:10mAH Dimension:45*31*10mm Mode of receiver output:S.bus,DSM1024 DSM2048 PPM PWM 3)Product lllustration Function Key Front Back 4)3 types of power input: (only use either one type of the power input.DO NOT use them at the same time) Micro usb lipo battery type c usb (PAY ATTENTION THE BATTERY POLARITY) 5) Voltages output and 2types of receiver connector 3.3v 5V 5( Voltage output selectyon key 2 types of receiver input,plug either one.DO NOT plug 2receivers at the same time 6) checking function Lipo Voltage battery SBUS DSM1024 Level(up to 6s) DSM2048 PPM