MAYASAF 515036 4WD ONLY Front Wheel Hub Bearing Assembly 6 Lugs wABS Fit 200206 Chevrolet SilveradoSuburbanAvalanche 1500 Tahoe GMC Sierra Savana 0206 Cadillac Escalade

Simplified Fitment Application (Please Use Amazon Part Finder at the top of this page, Enter your vehicle detailed information to make sure Fitment): 2002-2006 CHEVY AVALANCHE1500, AWD ONLY 2003-2013 CHEVY EXPRESS1500, AWD ONLY 2003-2005 CHEVY EXPRESS2500, AWD ONLY 1999-2007 CHEVY SILVERADO1500, AWD ONLY 2000-2006 CHEVY SUBURBAN1500, AWD ONLY 2001-2006 CHEVY TAHOE, AWD ONLY (2000 TAHOE BASE-LS-LT 4.8L Only) 2003-2013 GMC SAVANA1500, AWD ONLY 2003-2005 GMC SAVANA2500, AWD ONLY 1999-2007 GMC SIERRA1500, AWD ONLY (CLASSIC MODELS) 2000-2006 GMC YUKON, AWD ONLY (Exclude 2000 Denali) 2000-2006 GMC YUKON XL1500, AWD ONLY 2002-2006 CADILLAC ESCALADE, AWD ONLY 2003-2006 CADILLAC ESCALADE ESV, AWD ONLY 2002-2006 CADILLAC ESCALADE EXT, AWD ONLY *Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure. Installation Steps 1. Raise the vehicle and remove lug nuts and wheel rim. 2. Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire. 3. Remove the axle nut, using an axle nut socket. Follow the manufacturer’s instructions for nut replacement. 4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing. 5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft. 6. Remove the old hub, Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone. 7. Reverse the above orders to install the new wheel hub back. *Professional Installer Recommended *No Instruction Included