Simplified Fitment Application (Please Use Amazon Part Finder at the top of this page, Enter your vehicle detailed information to make sure Fitment):
2010-2014 Acura TL
2009-2014 Acura TSX
2008-2012 Honda Accord
2010-2011 Honda Accord Crosstour
2012-2015 Honda Crosstour
Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure.
Installation Steps
1. Raise the vehicle and remove lug nuts and wheel rim.
2. Remove the brake caliper and rotor. Support the brake caliper with an S hook or a piece of wire.
3. Remove the axle nut, using an axle nut socket. Follow the manufacturers instructions for nut replacement.
4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing.
5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft.
6. Remove the old hub, Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
7. Reverse the above steps and actions to install the new wheel hub back.
*Professional Installer Recommended
*No Instruction Included
MAYASAF 510095 Front Wheel Bearing for Honda 2008-2012 Accord-10-11 Accord Crosstour-12-15 Crosstour for Acura 2010-2014 TL-09-14 TSX
Was:
$97.88
Now:
$48.94
- SKU:
- TE441424
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.