Maxmartt Brine Shrimp Eggs brine Shrimp hatcherIncubator Incubator Hatchery Artemia Aquarium

Specification: Condition: 100%Brand New Material: Plastic Color: As shows in pictures Height: 27.5cm / 10.83in Outer diameter: 5cm / 1.97in Thickness: 0.2cm / 0.08in Package List: 1* Brine Shrimp Eggs Incubator 1* Lid Preventive measures: 1. Pour the treated water into the standard water level line of the incubator and add about 10g coarse salt to dissolve in advance. 2. Connect the air pump to the air inlet hole at the bottom of the insulated box and adjust the air volume to an appropriate amount. The ideal temperature is 28-30?. 3. The shrimp eggs were further injected with about 3 to 5g brine and incubated for about 36 to 48 hours (depending on the incubation temperature and the quality of the shrimp eggs). 4. Collection operation: after brine shrimp eggs hatch, stop pumping and leave for about 10-15 minutes. The hatched shrimp sink to the bottom, and the shells float up to collect the young shrimp from the original air inlet (air conditioning valve) at the bottom of the incubator. 5. Uneaten larva should be refrigerated. Please adjust the air intake. Too much or too little air intake will affect the hatching time and survival rate of brine shrimp eggs. Please use the air conditioner switch to adjust the air intake. 7. The bottom air supply port is connected with a simple check valve, which can effectively prevent backflow of water in the insulation box. 8. It can also be installed in aquariums and incubated in thermostatic aquariums. Note: 1.Product details may vary depending on the production batch. If you mind the difference, please buy carefully. 2.Due to manual measurement, please allow 1-3cm difference. 3.Because of the difference between the monitor and the light, the picture may not reflect the actual color of the object. Thank you for your understanding.