OEM Part Number(s): AF10125, 19112538, 19179716, 336-05115
FITMENT?
1995-1996 Buick Century
1996-1998 Buick LeSabre
1996-1998 Buick Park Avenue
1996-1998 Buick Regal
1996-1998 Buick Riviera
1996-1998 Chevrolet Camaro
1998 Chevrolet Lumina
1998 Chevrolet Monte Carlo
1996-1998 Oldsmobile 88
1996 Oldsmobile 98
1996 Oldsmobile Cutlass Ciera
1998 Oldsmobile Intrigue
1996-1998 Oldsmobile LSS
1997-1998 Oldsmobile Regency
1996-1998 Pontiac Bonneville
1997-1998 Pontiac Firebird
1997-1998 Pontiac Grand Prix
PACKAGE:
1 ?Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.
FITMENT?
1995-1996 Buick Century
1996-1998 Buick LeSabre
1996-1998 Buick Park Avenue
1996-1998 Buick Regal
1996-1998 Buick Riviera
1996-1998 Chevrolet Camaro
1998 Chevrolet Lumina
1998 Chevrolet Monte Carlo
1996-1998 Oldsmobile 88
1996 Oldsmobile 98
1996 Oldsmobile Cutlass Ciera
1998 Oldsmobile Intrigue
1996-1998 Oldsmobile LSS
1997-1998 Oldsmobile Regency
1996-1998 Pontiac Bonneville
1997-1998 Pontiac Firebird
1997-1998 Pontiac Grand Prix
PACKAGE:
1 ?Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.