OEM Part Number(s): 1SDZ12B579BA, 1SDZ12B579BB, 98AB12B579FA, XF2F12B579AA,MA160, 2451102, 2133426, 98AB12B579GA, 1L2F12B579BA
FITMENT?
99-03FORDTRUCK E150VAN V6-256 4.2L
99-03FORDTRUCK E250VAN V6-256 4.2L
99-01FORDTRUCK EXPLORERV8-302 5.0L
01-03FORDTRUCK EXPLORERV6-245 4.0L SOHC
01-03FORDTRUCK EXPLR SPRT/SPRT TRACV6-245 4.0L SOHC
04-05FORDTRUCK EXPLORER SPORT TRACV6-245 4.0L SOHC
01-02FORDTRUCK USPS POSTAL CHASSISV6-245 4.0L SOHC
2000FORDTRUCK EXPLORERV6-245 4.0L OHV
01-04FORDTRUCK ESCAPEV6-181 3.0L DOHC
99-01MERCURYTRUCK MOUNTAINEERV8-302 5.0L
99-01MERCURYTRUCK MOUNTAINEERV6-245 4.0L SOHC
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.
FITMENT?
99-03FORDTRUCK E150VAN V6-256 4.2L
99-03FORDTRUCK E250VAN V6-256 4.2L
99-01FORDTRUCK EXPLORERV8-302 5.0L
01-03FORDTRUCK EXPLORERV6-245 4.0L SOHC
01-03FORDTRUCK EXPLR SPRT/SPRT TRACV6-245 4.0L SOHC
04-05FORDTRUCK EXPLORER SPORT TRACV6-245 4.0L SOHC
01-02FORDTRUCK USPS POSTAL CHASSISV6-245 4.0L SOHC
2000FORDTRUCK EXPLORERV6-245 4.0L OHV
01-04FORDTRUCK ESCAPEV6-181 3.0L DOHC
99-01MERCURYTRUCK MOUNTAINEERV8-302 5.0L
99-01MERCURYTRUCK MOUNTAINEERV6-245 4.0L SOHC
PACKAGE:
1 × Air Flow Sensor
Installing The Replacement Mass Air Flow Sensor
1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
2. Install sensor-to-air-duct seal(s), if so equipped, on the replacement MAF sensor.
3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary.
NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.
5.CAREFULLY plug the harness connector lead into the MAF sensor.