Manelord Auto Body Dent Repair Tool - Dent Repair kit with Slide Hammer T bar Dent Puller for Car Body Hail Dent Removal Dent Remover Automobile Body Repair

Manelord professional auto dent repair kit do the job for you. Save cash and enjoy your time while you witness these tabs recover your car's dents like it's never been damaged before. Please don't worry about how to use this kit even if you never handle it before. Our package coming with detailed repair steps introduction for operate, it makes the dent removal process easily. Packing list 1 x Slide hammer T-bar dent puller 1 x Rubber hammer 5 x Yellow glue stick 5 x Black glue stick 16 x Black glue puller tabs 5 x Blue glue puller tabs 1 x Metal tap down pen 8 x Tap down head 2 x Glue shovel 1 x Empty alcohol bottle 1 x Black Clean Cloth 1 x Instructions Note: (No hot melt glue gun included, we suggest using 100W hot melt glue gun and hot melt glue sticks to work with this dent repair tool.) Easy to use :(Suit for dent&ding and home DIY repair) Step 1.Clean dent surface. Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 8-10 minutes. Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks. Step 4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. Step 5.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear. Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs. Note: For detailed operation and more tools, please refer to the instruction manual. Note: (No hot melt glue gun included)