Description:
This 186 50 battery charger box DIY Kit need welding battery or connect the battery to the charge board by yourself. The maximum output current is 2.1A and minimum output current is 1A. Both sides of the charging port will output the number based on how much current the smart phone receives, so no need to consider which port should be used when charging your mobile phone.
Features:
1. LED Blue backlight
2. Input: 5V /1A
3. Output voltage: 5V
4. Output current: 1A / 2.1A
5. Capacity: Can be installed 4 x 186 50 3.7V
6. Dimensions: 107 x 70 x 25 (mm)
DIY Progress:
1. Making Battery Pack
Notice: Please distinguish Battery +/ -. It's better to add insulating strip in the B+ in case the battery short circuit.
2. Welding B+ / -
The black cable should be connected to B-, the red cable should be connected to B+.
3. Activating Circuit / Charging Text
Link to 5V charger or PC USB, just two or three seconds, the circuit can be activated.
4. Discharging Text
Charge your cell phone, plug and play, no other operations.
5. Mounting Switch Button
Put the switch to switch fixed mount and makes it stable.
Mount the switch to the cover of power bank and stable it with soldering iron.
6. Put into battery pack and text
Package Including
2 * 186 50 Battery Charger Protection Module
1 * 186 50 Battery Charger Box-Black
This 186 50 battery charger box DIY Kit need welding battery or connect the battery to the charge board by yourself. The maximum output current is 2.1A and minimum output current is 1A. Both sides of the charging port will output the number based on how much current the smart phone receives, so no need to consider which port should be used when charging your mobile phone.
Features:
1. LED Blue backlight
2. Input: 5V /1A
3. Output voltage: 5V
4. Output current: 1A / 2.1A
5. Capacity: Can be installed 4 x 186 50 3.7V
6. Dimensions: 107 x 70 x 25 (mm)
DIY Progress:
1. Making Battery Pack
Notice: Please distinguish Battery +/ -. It's better to add insulating strip in the B+ in case the battery short circuit.
2. Welding B+ / -
The black cable should be connected to B-, the red cable should be connected to B+.
3. Activating Circuit / Charging Text
Link to 5V charger or PC USB, just two or three seconds, the circuit can be activated.
4. Discharging Text
Charge your cell phone, plug and play, no other operations.
5. Mounting Switch Button
Put the switch to switch fixed mount and makes it stable.
Mount the switch to the cover of power bank and stable it with soldering iron.
6. Put into battery pack and text
Package Including
2 * 186 50 Battery Charger Protection Module
1 * 186 50 Battery Charger Box-Black
